Panels · Sheet metal · Insulation · Accessories

NEXLER Dysperbit bitumen-rubber coating, 20 kg

15,54 € incl. VAT

In stock

Water-based bitumen dispersion with rubber, fillers and modifying additives.

Priming mineral and bituminous substrates: approximately 0.2 kg/m². Priming mineral wool beneath bituminous roofing membranes: at least 0.8 kg/m².

Roof maintenance: approximately 0.5 kg/m² per coat. Damp-proofing: approximately 1.5 kg/m² for each 1 mm of dry coating. Minimum dry thickness for damp-proofing: 1 mm.

Substrate and air temperature during application: +5 to +30 °C. Allow approximately 5 hours between coats and approximately 5 hours for rain resistance. Film formation takes up to 6 hours.

Price per 20 kg pail.

In stock

SKU: ecoprofil-9100 Category:

Description

NEXLER Dysperbit on a foundation wall: scope of protection

Before choosing Dysperbit, check whether the design calls for protection against ground moisture or water under pressure. The application described here is damp-proofing for below-ground parts of the building.

Look for the wall section and the specified waterproofing in the drawings. The description “bituminous compound” alone does not establish the water exposure for which the system was selected.

If the design allows for water under pressure, confirm the suitability of the complete system separately. Simply adding coats does not establish its suitability.

Calculate the priming quantity for the substrate in question. A separate calculation is needed for the damp-proof coating, taking its dry thickness into account.

Mark corners, service penetrations and the junction with the horizontal damp-proof layer on the sketch. Use the details specified in the design at these points.

Protect the fresh coating from rain. Plan the works and backfilling around the drying of the coating and the specified protection against damage.

Photograph the extent of the coating and its junctions before concealing it. This part of the wall will no longer be accessible after backfilling.

Waterproofing in the SteelProfil catalogue

What our customers say

Back to top