Choose a material

Roofing sheets

Blachy trapezowe

Sandwich panels

Płyty warstwowe

PIR insulation boards

Płyty izolacyjne PIR

XPS

Izolacja XPS

Accessories

Akcesoria montażowe

Fencing

Sztachety metalowe

Taking delivery of swissporPIR Alu on a house build

PIR insulation

At a glance

Start the delivery check before unpacking the pallet. Match the swissporPIR Alu labels to the order, count packs by thickness and record visible damage against specific packs. Then inspect boards, particularly corners and edges hidden by the wrapping. Separate questionable material from stock ready to lay. This guide takes you from the delivery note to another inspection after rain and explains why choosing a storage position is part of acceptance, especially when the pallet is to go onto a roof.

Insulation core and facing of swissporPIR Alu

Record what actually arrived

Photograph the pallet and the label of any damaged pack. “Crushed right corner, pack 3” identifies the issue more clearly than a general comment on delivery condition.

Match the data sheet to the boards

The declared conductivity of swissporPIR Alu is 0.022 W/(m·K). Resistance also depends on thickness: read it from the label before allocating the pack to a roof area.

Record a torn facing or broken rebate separately. A correct product code does not decide whether an individual damaged board is fit to install.

Keep packs flat and clear of the ground

Prepare firm, level supports and store the boards flat above ground. The soil beside a pallet can turn into standing water after the first shower.

Shelter the delivery from sun and rain. Choose a handling route that keeps projecting corners clear of scaffold tubes and other stored materials.

Look again after rain

Inspect the underside of the pack closest to the wet edge of the storage area. A dry top board does not establish the condition farther down.

Select dry, undamaged boards with intact edges and facings. Mark uncertain pieces and clarify their use with the supplier.

Choose a safe roof storage area

Before lifting a pallet, establish where the structure can take its concentrated weight. A finished roof load rating is not automatic approval for pallet storage.

Do not leave an open pack unsecured by the roof edge. Agree how to restrain loose boards against wind before removing their wrapping.

Schedule deliveries to match progress

Count how many packs fit under cover if rain stops work. On a small site, split deliveries can be preferable to blocking access.

Price transport, unloading and lifting to the roof separately. Check the delivery terms for reporting damage visible on receipt.

A damaged pack in an otherwise sound delivery

If one pack out of ten has a crushed side, keep its boards separate. Retain the label, photos and affected quantity so installer and supplier can assess the same pieces.

7 branches. Materials closer to your project.

  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]
Budowlanka.org — map

Free quote

What to include in your enquiry

Tell us how you plan to use the material, the dimensions and the quantity you need. Include the thickness, grade or variant name, along with the delivery town or your preferred collection branch. For a specific product, add its name or a link to the product page. We will reply to the email address you provide to discuss availability and the terms of your order.

More from the building guide