Choose a material

Roofing sheets

Blachy trapezowe

Sandwich panels

Płyty warstwowe

PIR insulation boards

Płyty izolacyjne PIR

XPS

Izolacja XPS

Accessories

Akcesoria montażowe

Fencing

Sztachety metalowe

PIR insulation boards: what to check before insulating

Rigid PIR insulation with thin foil facing and exposed core
At a glance

Rigid PIR insulation boards can be used in suitably designed roofs, walls and floors. Suitability depends on more than thickness and foam type: the facing, declared performance and surrounding layers all matter. A thin foil facing is not a sandwich panel’s metal skin, and a low thermal conductivity does not guarantee the performance of the whole building. Establish thermal requirements, loads, fixing method and moisture protection before ordering. This guide shows how to read the data sheet, compare pack quantities and prepare a quote request. The examples apply only to the specific variants named.

Select the board type before choosing thickness

The facing on termPIR AL is a composite of aluminium, paper and polyethylene. The manufacturer declares λD = 0.022 W/(m·K) for thicknesses of 20–250 mm. The facing is part of an insulation product; the board is not a loadbearing element. By contrast, termPIR ETX is intended for specified insulation systems. Its declared conductivity varies with thickness: 0.027 W/(m·K) below 80 mm, 0.026 from 80 to 119 mm and 0.025 from 120 mm. The shared PIR designation does not make the figures interchangeable.

For insulation under render, check the complete system: board, adhesive, fixings, reinforcement layer and render finish. A silver surface in a photograph does not establish compatibility with any particular finish. Include a section through the proposed assembly with your enquiry.

Conductivity, thermal resistance and load are different properties

Conductivity describes heat flow through a material. Thermal resistance R applies to a layer of specified thickness, while U describes the complete building element. A claim that 12 cm of PIR replaces 20 cm of another material needs actual conductivities and build-ups; it is not a general purchasing rule.

Read the compressive stress at 10% deformation with the same care. It is not the permissible sustained floor load. Specify insulation beneath a floor using the design documents and the way loads are distributed.

Do not describe PIR as non-combustible

Reaction to fire is product-specific. The termPIR AL data sheet states class E for 50–250 mm and F for 20–49 mm. The classification of a complete roof assembly is a separate matter. Do not apply an assembly result to an exposed board or promise equal protection regardless of installation.

Count packs and plan delivery

Compare the same unit: square metre, board or pack. A 1200 × 600 mm board has a geometric area of 0.72 m², but the board count per pack depends on thickness. Check cover dimensions and edge profiles as well. Cut pieces may no longer have their factory-formed joint.

Protect boards in transit and storage as the manufacturer specifies. Low water absorption of the core cannot replace building waterproofing. For outlet stock, inspect the actual facings and edges instead of relying on the label “second grade”.

Details for a quotation

State the application, full product designation, thickness, area, format, delivery date and location. Include the system name if the design specifies one. Current variants are listed in the PIR insulation boards category, and you can send your question using the form below.

7 branches. Materials closer to your project.

  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]
Budowlanka.org — map

Free quote

What to include in your enquiry

Tell us how you plan to use the material, the dimensions and the quantity you need. Include the thickness, grade or variant name, along with the delivery town or your preferred collection branch. For a specific product, add its name or a link to the product page. We will reply to the email address you provide to discuss availability and the terms of your order.

More from the building guide