Choose a material

Roofing sheets

Blachy trapezowe

Sandwich panels

Płyty warstwowe

PIR insulation boards

Płyty izolacyjne PIR

XPS

Izolacja XPS

Accessories

Akcesoria montażowe

Fencing

Sztachety metalowe

Per sheet or per square metre? Comparing quotes for corrugated roofing

Fibre cement roofing

At a glance

Two quotations showing similar corrugated fibre cement sheets may buy different amounts of finished roof. A price per sheet, per square metre of sheet and per square metre of effective cover refers to three different quantities. Read the unit, exact dimensions and product variant before comparing amounts. Both sellers may write “m²” but one may mean nominal area and the other laid cover. Allow for laps, cutting, accessories and work excluded from the offer. The apparently cheaper sheet can cost more on the roof once every item needed for the same layout is counted.

Grey corrugated fibre cement sheet with exposed mineral edge

Identify the unit for every line item

Lengths vary and laps affect consumption. Write the unit next to the price in your comparison table, not in a distant footnote. This makes it easier to recalculate quantities and resolve discrepancies before delivery is invoiced. Keep the complete quotation with all notes and attachments: a cropped screenshot may omit the condition that determines how the total is calculated.

Sheet area is length times width

Overall dimensions give the area before installation. A hypothetical 1.2 × 1.0 m sheet has an area of 1.2 m²; this is arithmetic, not a product specification. Its effective cover is smaller once the sheets overlap. Dividing the purchase price by the combined nominal area does not give the cost per square metre of finished roof. Check laying conditions and row ends first.

Calculate cover from the laying plan

Confirm the effective width and length for the chosen profile and laps in the system documentation. Edge sheets, angled edges, penetrations and cuts affect how rows end. Roof area divided by one sheet’s area gives only a preliminary estimate. Count the rows and individual sheets. If quotations show different quantities, ask for both cutting plans: the difference may reflect another format, a missed lap or an incorrect measurement.

Compare like-for-like accessories

Check quantities and compatibility of ridge fittings, verge pieces, fasteners and required seals. A quotation covering every edge is not comparable with sheets alone. Prepare one common list, flag omissions and ask for prices for the missing items. Leftover materials on site cannot be assumed to fit the profile or seal it properly, and improvisation may change the labour cost.

Check delivery and unloading

Long sheets require a suitable vehicle and a safe, prepared place to set down the packs without bearing on an edge. Agree who unloads and who pays for the equipment. For staged deliveries compare the total transport cost: smaller packs may be easier to store but require another trip. Check whether the price is for your actual site, including access and room to turn, rather than a generic online delivery rate.

Separate materials from additional work

Repairs to supports, removal of the old roof and temporary protection of the interior can be a substantial part of a refurbishment budget. Existing support centres may not suit the new sheets. Ask why one contractor prices alterations and another assumes none. The composition of an old roof affects removal; do not treat unidentified old sheets as confirmed asbestos-free material. Record responsibilities and scope, so the price does not depend on unspoken assumptions.

Compare the total and the terms before the discount

The final schedule should show quantities, accessories, transport and agreed work. Check tax treatment and the quotation expiry date. Format and colour affect availability, so include the delivery date: an unconfirmed item can hold up the job. A discount is meaningful only against a clear base price and scope. Show unpriced items explicitly so a low total does not conceal costs that emerge after work starts.

Ask suppliers to price the same roof drawing and delivery scope. Compare the complete covering, with a unit beside every amount.

7 branches. Materials closer to your project.

  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]
Budowlanka.org — map

Free quote

What to include in your enquiry

Tell us how you plan to use the material, the dimensions and the quantity you need. Include the thickness, grade or variant name, along with the delivery town or your preferred collection branch. For a specific product, add its name or a link to the product page. We will reply to the email address you provide to discuss availability and the terms of your order.

More from the building guide