Thermano Roof above the rafters: what to settle before the roof goes on
PIR insulation
Above the rafters, Thermano Roof preserves headroom but raises the covering in relation to the eaves, chimney and roof windows. Before choosing a thickness, ask for sections through those junctions. They should show the insulation, the route rainwater takes and how loads reach the timber. The rigid PIR core and aluminium-containing facings on both sides describe the board; the roof still needs its own design. Details drawn for a pitched roof cannot simply be carried over to a flat roof, another application for Thermano Roof.

Where the board fits in the project
Mark clear roof areas separately from rooflights, chimneys and valleys. Roof area alone tells the roofer little about the time needed for those junctions.
When reroofing, establish which flashings will still fit at the new height. Price removal, replacement flashings and temporary overnight weather protection separately.
Junctions worth checking
The usual overall size is 1200 × 2400 mm. Check whether the order specifies BASIC, TOP or MASTER edges: their geometry affects the joint layout.
Place a board outline over the roof window on the drawing. If it leaves a narrow strip, ask what will support it and whether shifting the row would avoid that cut.
Reading the thermal figures
Use the declared conductivity of Roof, 0.023 W/(m·K), when calculating the insulation resistance. At a given conductivity, resistance depends on thickness.
When comparing sections, ask for the thermal result for the roof including its fixings. A better compression test result does not make up for missing insulation thickness.
Protecting the layers and their junctions
Trace a raindrop on the section from the head of a roof window to the eaves. The board’s gas-tight facing does not replace the drainage layer.
Photograph the chimney detail once the flashing is in place and before it is concealed. A general photo of the finished covering cannot show where the lap discharges.
Understanding load and fire ratings
Thermano Roof is rated at least 200 kPa at 10% deformation, with TR100 tensile strength and reaction-to-fire class E. These describe three different properties.
For rooftop equipment, establish the load on each foot, its bearing area and its anchorage to the structure. The CS figure does not specify a permissible equipment weight.
Comparing the full scope of quotes
Compare quotes for the same board edge, thickness and number of openings. Establish who supplies the fixings and who specifies them.
Before accepting, total the roof area, linear metres of flashing and work at each window separately. This gives the cost of retaining loft space after the external alterations are included.
Free quote
What to include in your enquiry
Tell us how you plan to use the material, the dimensions and the quantity you need. Include the thickness, grade or variant name, along with the delivery town or your preferred collection branch. For a specific product, add its name or a link to the product page. We will reply to the email address you provide to discuss availability and the terms of your order.
More from the building guide
An internal ceiling in a farm building should allow the services located above it to be maintained and should not hinder inspection…
Before choosing a UNILIN wall board, mark its position on the section. Utherm Wall LE insulates a cavity wall. Wall K Gyp…
Renovation of a potato store before harvest must be planned from the conditions for receiving the first batch, not from the delivery…
On a flat roof using SOPREMA EFYOS BLUE A, start at the tightest detail: what height remains at the parapet once insulation…
When reroofing and insulating an attic from outside, compare how the underlay will be formed. Utherm Sarking LE Plus has an underlay…
For over-rafter Powerroof insulation, count boards by their covering dimensions, not their transport size. A 2400 × 1200 mm board covers 2380…
swissporPIR Alu is a PIR insulation board with a laminated facing. Its silver surface does not make it a self-supporting roof panel…
Rigid PIR insulation boards can be used in suitably designed roofs, walls and floors. Suitability depends on more than thickness and foam…














