Choose a material

Roofing sheets

Blachy trapezowe

Sandwich panels

Płyty warstwowe

PIR insulation boards

Płyty izolacyjne PIR

XPS

Izolacja XPS

Accessories

Akcesoria montażowe

Fencing

Sztachety metalowe

Thermano Compact for a small renovation: start with the cutting plan

PIR insulation

At a glance

Thermano Compact boards measure 600 × 1200 mm, a useful size for narrow stairs and a job made up of short runs. Measure the access route, the longest piece required and the space available for cutting as well as the recess itself. Draw the pieces on a full board outline. That sketch will tell you how many boards to buy and which factory edges will survive the cut. Thickness and the loads the insulation must carry are separate decisions.

Pack of Thermano Compact PIR insulation boards seen at an angle

What exactly are you buying?

A cardboard template will help you try the turn on a staircase. Allow for the pack thickness if boards will be carried upstairs unopened.

Two recesses of equal area can require different board counts. Whether an offcut can be reused depends on its width, length and remaining factory edge.

Junctions worth checking

Compact comes with a straight BASIC or profiled TOP edge. Cutting through a profiled side removes the factory joint on that edge.

Mark the destination of each cut edge on the sketch. The installer can then specify how each joint will be closed before the order is placed.

Reading the thermal figures

Use λD = 0.023 W/(m·K) for Compact. A handy board size changes handling, not the thickness needed for thermal performance.

At a reveal, measure from the masonry to the moving sash. Check on the section that the window will open freely once the finish is added.

Protecting the layers and their junctions

The aluminium-containing facing cannot drain a defective sill. Inspect the frame-to-wall junction before hiding it behind the new insulation.

For floors, establish which side of the insulation carries the damp protection. Its edges at walls and pipes matter just as much as the middle of a board.

Understanding load and fire ratings

The manufacturer specifies compressive stress at 10% deformation by thickness. Check the declaration for the supplied thickness; the Compact name alone does not give a design load.

The figures given are at least 150 kPa up to 30 mm and 200 kPa from 40 mm. Reaction-to-fire class E applies to the board, not the finished recess lining.

Quotation and handover

Send the cutting plan, thickness and edge type with your enquiry. Ask how many boards are in a pack of that specific version.

Establish whether carrying, cutting and joint work are included. A square-metre price omits the very operations that make a small format attractive.

7 branches. Materials closer to your project.

  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]
Budowlanka.org — map

Free quote

What to include in your enquiry

Tell us how you plan to use the material, the dimensions and the quantity you need. Include the thickness, grade or variant name, along with the delivery town or your preferred collection branch. For a specific product, add its name or a link to the product page. We will reply to the email address you provide to discuss availability and the terms of your order.

More from the building guide