Choose a material

Roofing sheets

Blachy trapezowe

Sandwich panels

Płyty warstwowe

PIR insulation boards

Płyty izolacyjne PIR

XPS

Izolacja XPS

Accessories

Akcesoria montażowe

Fencing

Sztachety metalowe

Can termPIR ETX be rendered? Choosing insulation for a house façade

PIR insulation

At a glance

termPIR ETX is a rigid PIR board with a gas-permeable glass-fleece facing, intended for two-layer walls in a compatible external thermal insulation composite system (ETICS). It is not a universal base for any render. Ask for the named system, suitable substrate, adhesive, fixings, reinforcement and corner details before ordering. A restricted window reveal is a useful test: show how the thinner insulation beside the frame joins the full wall thickness. Then check which conductivity applies at each thickness and confirm the production date before committing the scaffolding and installation crew.

termPIR ETX insulation board showing its PIR core and facing

What the façade quote should specify

Identify the named ETICS for this masonry and the fleece-faced ETX board in it. A narrow reveal is not grounds for substituting a similar board with a different facing. Ask to see the continuous insulation line at the frame.

Check the production date before booking the work. The installation instructions require a month between manufacture and installation. Delivery the day before work starts says nothing about whether that interval has elapsed.

Which side faces the wall?

Check the first row for the print facing the wall. Stagger the next row’s joints and keep all outer faces in one plane.

Record manufacture on the delivery note and mark laying direction and joint offsets on the elevation. The scaffold schedule does not shorten the one-month interval. Start bonding only once board age and substrate readiness are confirmed.

Use the conductivity for the actual thickness

ETX has three conductivity bands: 0.027 W/(m·K) below 80 mm; 0.026 from 80 to below 120 mm; and 0.025 from 120 to 250 mm. The 80 and 120 mm thresholds enter the next band.

Write down wall and reveal thicknesses side by side. Assign the correct lambda before calculating R. Using 0.025 for a thin reveal board would overstate its resistance.

Inspecting moisture and the bonding surface

Before adhesive is applied the wall should be dry, clean, level and sound. Inspect old coatings: flaking paint, detached render and efflorescence do not become sound substrates when concealed.

Mark questionable areas and record repairs. Remove weak material and determine why the wall is damp. A photograph and assessment of the prepared wall provide better evidence than a later photograph of smooth render.

Distinguish compression, fixing and fire performance

The ETX sheet specifies CS(10/Y)120. For the board’s reaction to fire, read the thickness band: F at 20–49 mm and E at 50–250 mm. These are independent properties.

At the corner, request the anchor layout for the masonry and façade load zone. CS determines neither anchor spacing nor fire performance of the complete ETICS. Keep the requirements for both anchors and reinforcement.

Price the complete rendered finish

Start the ETX layout with the nominal 600 × 1,200 mm format. Check cover size for profiled edges. Pair the resulting board quantity with components of the agreed façade system.

Complete the take-off at window corners, sills and the top edge. Include cuts, flashings, reinforcement, anchors and wall preparation. A board-bonding price alone omits the terminations that keep water from behind the façade.

7 branches. Materials closer to your project.

  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]
Budowlanka.org — map

Free quote

What to include in your enquiry

Tell us how you plan to use the material, the dimensions and the quantity you need. Include the thickness, grade or variant name, along with the delivery town or your preferred collection branch. For a specific product, add its name or a link to the product page. We will reply to the email address you provide to discuss availability and the terms of your order.

More from the building guide