Choose a material

Roofing sheets

Blachy trapezowe

Sandwich panels

Płyty warstwowe

PIR insulation boards

Płyty izolacyjne PIR

XPS

Izolacja XPS

Accessories

Akcesoria montażowe

Fencing

Sztachety metalowe

Acoustic sandwich panels: sound absorption or sound insulation?

Perforated facing on a mineral wool acoustic sandwich panel
At a glance

An acoustic sandwich panel with a mineral wool core and a perforated facing can reduce reflections inside a room. First establish which problem you need to solve. Shortening reverberation calls for sound absorption; limiting noise passing through a wall calls for sound insulation. The area treated, room geometry, openings and installation all influence the result. This guide explains the figures in a data sheet and the information a designer needs to select a panel. No single thickness guarantees a quiet workshop, warehouse or industrial hall.

How the perforated facing works

The holes let sound waves reach the absorbent core. They are functional, not merely decorative. Orient the perforated side as specified for the product. Covering it with an impervious layer can change the acoustic response.

A smooth-faced mineral wool panel and its acoustic counterpart may look alike in a small photograph. Specify the full model designation and request its data sheet before treating the two as equivalent.

Two sets of acoustic figures

The weighted sound absorption coefficient αw describes absorption. The weighted sound reduction index Rw, expressed in decibels, describes sound insulation. Documentation may also list the adjusted indices RA1 and RA2. Establish what each figure measures before comparing numbers.

For example, the WOOLTECH Acoustic documentation lists αw = 0.65, Rw = 31 dB, RA1 = 29 dB and RA2 = 27 dB for its 100 mm panel. These are product results, not guaranteed reductions in room noise. The same catalogue gives Uc = 0.39 W/(m²·K) and reaction to fire A2-s1,d0; neither replaces a building acoustics calculation.

Why the room matters as much as the panel

Room volume, hard surfaces and the number and position of noise sources all matter. Absorbers may need to cover selected wall or ceiling areas. Improving speech conditions for workers can require a different treatment from controlling a noisy machine.

Include gates, doors, gaps and service penetrations when assessing transmission. A laboratory figure for a panel does not describe a wall with an open door. Treat insulation and absorption as separate but complementary design tasks.

Selection and installation

Tell the designer where noise originates, how the space is used and what improvement you need. Supply room dimensions, intended panel positions and environmental conditions. Check moisture, cleaning and load requirements separately from the acoustic ratings.

Install the chosen system with its specified supports, fixings and flashings. Do not borrow sealing details from another panel family without confirmation of compatibility. Inspect perforations, edges and facings when the batch arrives.

What to include in an acoustic panel enquiry

State whether you want to reduce reverberation, noise transmission or both. Include design requirements, area to be treated, thickness, lengths and delivery location. If a model has been specified, name it so the quotation covers the right product.

7 branches. Materials closer to your project.

  • SEROCK — Dzierżenin 34 E [mapa]
  • BŁONIE — ul. Sochaczewska 138A [mapa]
  • RADOM — ul. Grobickiego 8 [mapa]
  • ŁÓDŹ — Natolin 8 [mapa]
  • OLSZTYN — Barczewo, ul. Prosta 9 [mapa]
  • WROCŁAW — ul. Jerzmanowska 10C [mapa]
  • GORZÓW WLKP. — ul. Zielona 33/34 [mapa]
Budowlanka.org — map

Free quote

What to include in your enquiry

Tell us how you plan to use the material, the dimensions and the quantity you need. Include the thickness, grade or variant name, along with the delivery town or your preferred collection branch. For a specific product, add its name or a link to the product page. We will reply to the email address you provide to discuss availability and the terms of your order.

More from the building guide